Dashboard for Hondata K-Pro & S300 ECUs

View project on GitHub Follow us on Instagram

Optional sensors

Optional analog sensors are also read from K-Pro and displayed in HonDash, you can read how to wire them in the official Hondata guide:

Some digital ones also work with HonDash:

Once the sensor is wired and correctly working in K-manager you can setup HonDash to display it, check the setup guide for that.

For now not all the sensors that work with Hondata can be read in HonDash but they would be added in the future, here is the current list:

Sensor type Reference Thread Working range min_voltage max_voltage min_value max_value
Wideband All K-Pro supported ones - - - - - -
Ethanol content All K-Pro supported ones - - - - - -
Temperature VDO 323-057 (inline with 56Ω resistor) 1/8 NPT -40 - 150 ºC - - - -
Temperature AEM 30-2012 / Delphi 12160855 1/8 NPT -40 - 150 ºC - - - -
Temperature Bosch 0280130039 / 0280130026 M12x1.5mm -40 - 130-140 ºC - - - -
Pressure Autometer 2246 / Generic transducer X psi 1/8 NPT 0 - X psi / 0.5V - 4.5V 0.5 4.5 0 psi X psi
Custom linear Check Fuel level as example - whatever linear range up to 5v - - - -